Exterior illuminated notice board

Illuminated magnetic notice board specification

Colour:  Silver anodised
Depth of frame: 40mm
Overall sizes: see below
Illumination: 2 rows of LED lights concealed behind the door frame and designed to illiminate menus or notices displayed within.
Power supply:  The notice board is supplied with a Power Supply Unit and connection lead.  The Power Supply plugs into the mains (indoors or in a waterproof outdoor box) and steps down the voltage to a safe outdoor level matched to the voltage required by the LED light strips.
A pair of separate fixing rails are supplied on which to hang the notice board without having to compromise the watertightness of the menu case by penetration the case itself.  Once the pair of rails has been fixed to the wall outside the restaurant (or elsewhere), the menu case is hooked onto the top rail and locked (from the underside of the notice board) onto the lower rail using 2 grub screws supplied.  This makes the unit secure with concealed fixings.
These illuminated menu boards can be fitted with the hinged door opening upwards or to the side depending on your preference.  Generally the door on the 4xA4 model opens to the side and the 2xA4 door opens upwards.  A stay is supplied to prop the door open when used this way.
The door is equipped with a lock and two keys.
The door closes onto a rubber gasket to keep weather at bay.  Please note that under some conditions condensation can occur inside the glazed door but usually it clears quite quickly.
The glazing in the door is clear polycarbonate which is resistant to a degree of vandalism.
We recommend wiring is carried out by a qualified electrician.

Dimensions of the available sizes are as follows:
Dimensions are stated as Width x Height when the door is side hung. 
(If installed with the door top hung the first stated dimension becomes the height).